Before moving your amp and speakers, you should prepare them by packing them in strong cardboard boxes. If you’re moving a floorstanding speaker, for example, you’ll need two boxes. Speaker manufacturers may provide moving boxes, and large electronics stores may also carry suitable boxes. In order to prevent damage during transit, make sure you use strong moving boxes. If you’re not sure where to get these boxes, you can ask a store clerk or contact your moving company for recommendations. packers and movers for local
When packing your floorstanding speakers, make sure to cover the front of the speaker with packing paper fists. You should also wrap them in bubble wrap, as floorstanding speakers are especially sensitive. If possible, use the original boxes that came with your speakers, because the packing paper is less likely to damage them. This will ensure your speakers remain undamaged during the moving process. The floorstanding speakers can be delicate and you don’t want to damage them by accident.
Before packing your amplifier and speakers for moving, you should know their power ratings. The power ratings are usually stated as peak/PMPO or RMS. For reference, it’s helpful to consider the impedance of the speakers. If they’re too low, you might be risking overheating the amplifier. Ideally, the electrical power between the amplifier and speaker should remain below a certain limit to avoid overheating.